WALLS

<<<==Click here for Customer Reviews!

 

   2x4      2x4      2x6     2x6     2x8      2x8     2x8
  R15HD  R21SPF   R21HD  R35SPF    R25         R30    R46SPF

BATT INSULATION FOR EXTERIOR WALLS

In new construction, unfinished basements, garages, shops or additions where the walls may not be covered with drywall, we offer a variety of different insulation materials. Some of the material we offer include: roxul (fireproof & water repellent), unfaced or faced fiberglass batts, regular or high density fiberglass batts, rigid foam board, spray foam up to 2", blown-in cellulose, blown-in fiberglass, we also have a more cost effective alternative to drywall in unfinished areas called WMPVR (white). Ask us about which insulation type would be appropriate and the best solution for the walls in your home. Here are the recommend batt R-Values for a variety of joist depths: 

***Savings on energy bills vary. Higher R-Values mean greater insulation power. SPF = Spray Foam

DRILL & FILL BLOWN-IN CELLULOSE FOR INTERIOR WALLS

It can be challenging to insulate a wall to reduce noise/sound when there's drywall installed. We offer a drill & fill technique that makes this possible without having to hire costly demolition, drywall reinstall, mudding/taping and painting. Our technique involves drilling 2" holes at each cavity and filling those holes with cellulose blown-in insulation. We cover the holes with a foam or wooden plug. Cellulose is a denser and heavier insulation that we can dense pack, making it a superior product for sound reduction. For more info review the link below:

Cellulose

DRILL & FILL BLOWN-IN FIBERGLASS FOR EXTERIOR WALLS

It can be challenging to insulate an exterior wall when there's drywall installed. We offer a drill & fill technique that makes this possible without having to hire costly demolition, drywall reinstall, mudding/taping and painting. Our technique involves drilling 2" holes at each cavity and filling those holes with Owen's Corning L77 fiberglass blown-in insulation. This material is formaldehyde-free, which is the reason we use it over other brands. We cover the holes with a foam or wooden plug. For more info check out the link below:

Fiberglass Blown-in

CLOSED CELL SPRAY FOAM & RIGID FOAM BOARD

It can be challenging to insulate a wall, crawl space or attic when there is limited joist depth. In these situations, we use closed cell spray foam. We offer it in 1 - 7" applications. You get about an R7 value per inch vs. traditional batts that can only achieve a maximum of R3.5 per inch with a high density batt. Spray foam can also be a great alternative to seal off entry points for rodents trying to enter the living space of your home. Rigid foam board is used in smaller jobs that might not warrant scheduling the spray foam crew rig. Spray foam is the perfect combination of a air and thermal barrier in one product. For more info, review the link below:

Spray Foam

Servicing Counties: Snohomish, King, Pierce and Skagit in WA
Sales@InsulationCo.com   |   Call or Text 425.903.6453

***Savings on Energy Bills vary. Higher R-Values mean greater insulation power.

Licensed, Bonded, Insured. Copyright © 2018 Insulation Co. LLC. All Rights Reserved.